Main Menu - Search Channels; Automatic Channel Search; Manual Channel Search - Kathrein UFS 900sw Operating Manual

After calling up the menu you will see
the following on-screen display:
You have three different search options:

- Automatic Channel Search

- Manual Channel Search

- Search with Service ID

Use the buttons to select the
desired search type and confi rm your

selection using the
After a search (of whatever type) the receiver shows all newly found
channels in the channel list under the heading "New Channels".
You will fi nd this rubric in the channel list at the end of the green complete
list (select using the
The channel list is called up on to the TV screen by pressing the
(see also section "Basic Functions", "Channel selection from the channel
list").
After calling up the menu you will see
the following on-screen display:

The buttons
select different sets of parameters for
the search.
Satellite

Using the buttons, select the satellite to be searched. Make sure your reception system is
aligned to the selected satellite. You can search only one satellite at a time. If you have connected
a multi-feed reception system (e.g. reception of ASTRA 19.2° East and HOTBIRD 13° East),

Main Menu - Search Channels

button.

buttons).
allow you to
Automatic All transponders for the satellite
Channel you selected will be searched
Search
Manual Only the selected transponder for
Channel the satellite you selected will be
Search searched
Search with Search for a specifi c channel
Service ID using its service ID

button
73