Option Selection; Error Reporting; Channel List - Tv/Radio - Kathrein UFT 676sw Operating Manual

OPTION SELECTION

Press the (yellow) button once (twice for portal
channels) to view further audio selection options, if
these are transmitted by the channel provider. Use
the buttons to scroll through the available
selection options. Press the
or press the button to exit this display again.

ERROR REPORTING

"Weak or no signal" indicates that an error has occurred in the reception system or in the receiver
settings.
Check the antenna connection and your receiver settings. If you have changed settings, compare them
against the basic settings (provided you had made a note of them as suggested).

CHANNEL LIST - TV/RADIO

Also note the bars at the bottom
of the on-screen display! These
provide information on what to do
next.
Press the button to access the
channel list.
When you open this list the channel list selection/sort order is displayed from where you selected the
last channel.
At the top left you will see the selected channel list (TV Channel or Radio Channel) displayed.
Press the (blue) button to switch between the TV and radio channel lists.
24
ON-SCREEN DISPLAYS (OSD)
(yellow) button again,