Figure 3-5 Changing Parameters Via The Bop - Siemens SINAMICS G110 Operating Instructions Manual

Commissioning
Changing parameters with the Basic Operator Panel
The description below serves as an example that shows how to change any
parameters using the BOP. These examples can also be used as a guide to
configuring the inverter for running via the BOP (start/stop commands and the
frequency setpoint are input on the BOP).
Changing P0003 – parameter access level
1
Press
2
Press
3
Press
Press
4
(set to 3)
5
Press
All level 1 to level 3 parameters are now
6
visible to the user.
Changing P0719 an indexed parameter – setting BOP control
1 Press
2 Press
3
Press
4
Press
5 Press
6
Press
7
Press
8 Press
Press
9
standard drive display (as defined by the
customer)
Figure 3-5
38
Step
to access parameters
until P0003 is displayed
to display the parameter value
or to set the required value
to confirm and store the value
Step
to access parameters
until P0719 is displayed
to access the parameter value
or to select index 1
to display actual set value
or to the required value
to confirm and store the value
until r0000 is displayed
to return the display to the
Changing parameters via the BOP
Result on display
Result on display
SINAMICS G110 Operating Instructions
6SL3298-0AA11-0BP0
04/2005