Electro-Magnetic Compatibility (Emc) - Siemens SINAMICS G110 Operating Instructions Manual

04/2005

9 Electro-Magnetic Compatibility (EMC)

9.1 Electro-Magnetic Compatibility (EMC)
All manufacturers / assemblers of electrical apparatus which "performs a complete
intrinsic function and is placed on the market as a single unit intended for the end
user" must comply with the EMC directive EC/89/336.
There are two routes for the manufacturer/assembler to demonstrate compliance:
9.1.1 Self-Certification
This is a manufacturer's declaration that the European standards applicable to the
electrical environment for which the apparatus is intended have been met. Only
standards that have been officially published in the Official Journal of the European
Community can be cited in the manufacturer's declaration.
9.1.2 Technical Construction File
A technical construction file can be prepared for the apparatus describing its EMC
characteristics. This file must be approved by a 'Competent Body' appointed by the
appropriate European government organization. This approach allows the use of
standards that are still in preparation.
Note
The SINAMICS G110 inverter is designed to be used only by professional end
users with EMC knowledge. It is not designed for users that do not have EMC
knowledge.
These operating instructions give sufficient information which enables the
professional end user to implement all the necessary measures to ensure
electromagnetic compatibility.
SINAMICS G110 Operating Instructions
6SL3298-0AA11-0BP0
Electro-Magnetic Compatibility (EMC)
73