Siemens SINAMICS G110 Operating Instructions Manual page 47

04/2005
NOTES
P0308 & P0309 are only visible if P0003 = 3. For detailed information, please
see the Parameter List.
P0307 indicates kW or HP depending upon the setting of P0100. For detailed
information, please see the Parameter List.
Changing motor parameters is not possible unless P0010=1.
Ensure that the motor is configured correctly to the inverter, i.e. in the above
example delta terminal connection is for 230 V.
SINAMICS G110 Operating Instructions
6SL3298-0AA11-0BP0
Commissioning
47