Advertisement
7PZ IP
3. The name of the unit will now be displayed, press MODE to exit.
Software Info:
1. Press the MODE button to access the main menu. Press the UP
or DOWN buttons so that "Menu Info" is highlighted, then press
ENTER.
2. Press the UP or DOWN buttons, until "Info Software" is dis-
played, and press ENTER.
3. The software version will now be displayed, press MODE to exit.
Error Info:
1. Press the MODE button to access the main menu. Press the UP
or DOWN buttons so that "Menu Info" is highlighted, then press
ENTER.
2. Press the UP or DOWN buttons, until "Info ErrorInf" is dis-
played, and press ENTER.
3. Any errors that may have occured will be displayed, press MODE
to exit.
Zoom Reset:
1. Press the MODE button to access the main menu. Press the UP
or DOWN buttons so that "Menu ZoomRset" is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons, until "ZoomRset Reset. M" is
displayed, and press ENTER.
3. The display will now show "Reset. M Zoom". Press ENTER to
reset the zoom function.
Zoom Calibration: With this function you can calibrate and adjust the
zoom function to its correct position. The Calibration password 050.
NOTE: ONLy QUALIFIED TECHNICIANS SHOULD PERFORM THIS
FUNCTION.
1. Press the MODE button to access the main menu. Press the UP
or DOWN buttons so that "Menu ZoomRset" is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons, until "ZoomRset Calibrat" is
ADJ Products, LLC - www.adj.com - 7PZ IP User Manual Page 30
Operating Instructions
7PZ IP
displayed, and press ENTER.
3. The display will now show the current calibration setting.
Slave Setting:
1. Press the MODE button to access the main menu. Press the UP
or DOWN buttons so that "Menu Slave" is highlighted, then
press ENTER.
2. The display will now show "Slave" designating it as the slave fix-
ture in a Master-Slave set up.
3. The display will now show "Reset. M Zoom". Press ENTER to
reset the zoom function.
Manual Control:
1. Press the MODE button to access the main menu. Press the UP
or DOWN buttons so that "Menu Manual" is highlighted, then
press ENTER.
2. Use the UP and DOWN buttons to scroll through the manual
settings that include Zoom, Master Dimmer, Red Intensity, Green
Intensity, Blue Intensity, White Intensity, and Strobe.
3. When you find a setting you would like to adjust press ENTER.
Use the UP and DOWN buttons to make adjustments, then press
ENTER.
ADJ Products, LLC - www.adj.com - 7PZ IP User Manual Page 31
Operating Instructions
Advertisement
