Advertisement
7PZ IP
WiFLY On/Off:
This function is used to turn the WiFly function on and off.
1. Plug the fixture in and access the main menu. Press the UP or
DOWN buttons until "Menu Function" is displayed, and press
ENTER.
2. Press the UP or DOWN buttons until "Wireless" is displayed.
Press ENTER to access, and use the UP or DOWN buttons to
switch between "ON" (wireless activated) or "OFF" (wireless deac
tivated).
3. Press ENTER to confirm your selection and press the MODE but-
ton to exit this menu.
Current Running Time:
1. Press the MODE button to access the main menu. Press the UP
or DOWN buttons so that "Menu Info" is highlighted, then press
ENTER.
2. Press the UP or DOWN buttons, until "Info TimeInfo" is dis-
played, and press ENTER.
3. Press the UP or DOWN buttons, until "TimeInfo Current" is dis-
played, and press ENTER.
4. The current running time will now be displayed, press MODE to
exit.
Total Running Time:
1. Press the MODE button to access the main menu. Press the UP
or DOWN buttons so that "Menu Info" is highlighted, then press
ENTER.
2. Press the UP or DOWN buttons, until "Info TimeInfo" is dis-
played, and press ENTER.
3. Press the UP or DOWN buttons, until "TimeInfo TotalTim" is dis-
played, and press ENTER.
4. The total running time will now be displayed, press MODE to exit.
Last time the current running time was cleared:
1. Press the MODE button to access the main menu. Press the UP
or DOWN buttons so that "Menu Info" is highlighted, then press
ENTER.
ADJ Products, LLC - www.adj.com - 7PZ IP User Manual Page 28
Operating Instructions
7PZ IP
2. Press the UP or DOWN buttons, until "Info TimeInfo" is dis-
played, and press ENTER.
3. Press the UP or DOWN buttons, until "TimeInfo LastClea" is dis-
played, and press ENTER.
4. The the last time the current running time was cleared will now be
displayed, press MODE to exit.
TimerPin (Clear current Running Time):
In this menu you must input the timer pin to clear the current running
time.
1. Press the MODE button to access the main menu. Press the UP
or DOWN buttons so that "Menu Info" is highlighted, then press
ENTER.
2. Press the UP or DOWN buttons, until "Info TimeInfo" is dis-
played, and press ENTER.
3. Press the UP or DOWN buttons, until "TimeInfo TimerPIN" is
displayed, and press ENTER.
4. You must now put in the Pin number "050" to clear the current
running time.
Current Running Temperature:
1. Press the MODE button to access the main menu. Press the UP
or DOWN buttons so that "Menu Info" is highlighted, then press
ENTER.
2. Press the UP or DOWN buttons, until "Info TempInfo" is dis-
played, and press ENTER.
3. The current running temperature will now be displayed. Press the
MODE button to exit.
Model Info:
1. Press the MODE button to access the main menu. Press the UP
or DOWN buttons so that "Menu Info" is highlighted, then press
ENTER.
2. Press the UP or DOWN buttons, until "Info Model Inf" is dis-
played, and press ENTER.
ADJ Products, LLC - www.adj.com - 7PZ IP User Manual Page 29
Operating Instructions
Advertisement
