Advertisement
7PZ IP
played, and press ENTER. Use the UP or DOWN buttons to find
your desired setting.
• "Blackout" - If the DMX signal is lost or interrupted, the unit will auto-
matically go into stand by mode.
• "Hold" (Last State) - If the DMX signal is lost or interrupted, the fixture
will stay in the last DMX set up. If power is applied and this mode is set,
the unit will automatically go into the last DMX set up.
• "Program" - If the DMX signal is lost or interrupted, the unit will auto-
matically run a built-in program.
3. Find your desired setting and press ENTER. Your setting will be
saved automatically.
Zoom:
The zoom function indicated here works with Auto Run mode, Static
color mode, 6 Color change mode, 30 Color change mode, and Auto
Fade mode.
1. Plug the fixture in and access the main menu. Press the UP or
DOWN buttons until "Menu Function" is displayed, and press
ENTER.
2. Press the UP or DOWN buttons until "Zoom" is displayed, and
press ENTER.
3. Use the UP or DOWN buttons to adjust the zoom.
4. When you are finished making your adjustment press ENTER and
press the MODE button to exit this menu.
Auto Run Mode:
1. Plug the fixture in and access the main menu. Press the UP or
DOWN buttons until "Menu Function" is displayed, and press
ENTER.
2. Press the UP or DOWN buttons until "Auto Run FQN" is dis-
played, and press ENTER.
3. Use the UP or DOWN buttons to adjust the Auto Run.
4. When you are finished making your adjustment press ENTER and
press the MODE button to exit this menu.
Static Color Mode:
1. Plug the fixture in and access the main menu. Press the UP or
DOWN buttons until "Menu Function" is displayed, and press
ADJ Products, LLC - www.adj.com - 7PZ IP User Manual Page 24
Operating Instructions
7PZ IP
ENTER.
2. Press the UP or DOWN buttons until "Static CL:X" is dis-
played, and press ENTER.
3. Press ENTER again to adjust the static colors. Use the UP or
DOWN buttons to scroll through the colors.
4. When you have found your desired color press ENTER. Your are
now in the strobe menu. You can use the UP or DOWN buttons to
adjust the strobe rate. Press ENTER when have finished making
your adjustements.
6 Color Change Mode:
1. Plug the fixture in and access the main menu. Press the UP or
DOWN buttons until "Menu Function" is displayed, and press
ENTER.
2. Press the UP or DOWN buttons until "Static CL:X" is dis-
played, and press ENTER.
3. Use the UP or DOWN buttons to scroll until "2. Chang6" is dis-
played. Press ENTER and use the UP or DOWN buttons to adjust
the color change speed.
4. When you have found your desired color change speed press
ENTER. Your are now in the strobe menu. You can use the UP or
DOWN buttons to adjust the strobe rate. Press ENTER when have
finished making your adjustements.
30 Color Change Mode:
1. Plug the fixture in and access the main menu. Press the UP or
DOWN buttons until "Menu Function" is displayed, and press
ENTER.
2. Press the UP or DOWN buttons until "Static CL:X" is dis-
played, and press ENTER.
3. Use the UP or DOWN buttons to scroll until "3. Chang30" is dis-
played. Press ENTER and use the UP or DOWN buttons to adjust
the color change speed.
4. When you have found your desired color change speed press
ENTER. Your are now in the strobe menu. You can use the UP or
DOWN buttons to adjust the strobe rate. Press ENTER when have
finished making your adjustements.
ADJ Products, LLC - www.adj.com - 7PZ IP User Manual Page 25
Operating Instructions
Advertisement
