Advertisement
7PZ IP
Auto Fade Mode:
1. Plug the fixture in and access the main menu. Press the UP or
DOWN buttons until "Menu Function" is displayed, and press
ENTER.
2. Press the UP or DOWN buttons until "Static CL:X" is dis-
played, and press ENTER.
3. Use the UP or DOWN buttons to scroll until "4. Fade" is dis-
played. Press ENTER and use the UP or DOWN buttons to adjust
the color change speed.
4. When you have found your desired color fade speed press
ENTER. Your are now in the strobe menu. You can use the UP or
DOWN buttons to adjust the strobe rate. Press ENTER when have
finished making your adjustements.
Color Macros Mode:
1. Plug the fixture in and access the main menu. Press the UP or
DOWN buttons until "Menu Function" is displayed, and press
ENTER.
2. Press the UP or DOWN buttons until "Macros" is displayed, and
press ENTER.
3. Use the UP or DOWN buttons to scoll through the 63 color mac
ros.
4. When you have found your desired color Your are now in the
Zoom menu. You can use the UP or DOWN buttons to manually
adjust the zoom. Press ENTER when have finished making your
adjustements.
Wireless Address:
This function is used to set the wireless address. This address must
match the address that is set to WiFly TransCeiver or WiFly controller.
1. Plug the fixture in and access the main menu. Press the UP or
DOWN buttons until "Menu Function" is displayed, and press
ENTER.
2. Press the UP or DOWN buttons until "Wireless CH:XX" is dis-
played. "XX" represents the current displayed address. Press
ENTER to access, and use the UP or DOWN buttons to adjust
the wireless channel.
3. When you are finished making your adjustment press ENTER and
press the MODE button to exit this menu.
ADJ Products, LLC - www.adj.com - 7PZ IP User Manual Page 26
Operating Instructions
7PZ IP
LCD.Set:
This menu is used to adjust the backlight to stay on all the time or
turn off after about 5 seconds, set the Key Lock, and Display Flash.
1. Plug the fixture in and access the main menu. Press the UP or
DOWN buttons until "Menu Function" is displayed, and press
ENTER.
2. Press the UP or DOWN buttons until "LCD.Set" is displayed.
Press ENTER to the menu. Use the UP or DOWN buttons to make
adjustments. Press the ENTER button to scroll between the 3
menus.
3. When you are finished making your adjustment press ENTER and
press the MODE button to exit this menu.
Default Settings:
When this mode is activated the unit will return to their default set-
tings.
1. Plug the fixture in and access the main menu. Press the UP or
DOWN buttons until "Menu Function" is displayed, and press
ENTER.
2. Press the UP or DOWN buttons until "DFSET" is displayed, and
press ENTER.
3. Use UP or DOWN buttons to switch between "ON/OFF. If you
would like the default setting highlight "ON" and press ENTER.
Press the MODE button to exit.
Temperature C/F :
With this function, you can change the temperature display to show
either Celsius or Fahrenheit.
1. Press the MODE button to access the main menu. Press the UP
or DOWN buttons so that "Menu Function" is highlighted, then
press ENTER.
2. Press UP or DOWN buttons, until "Temp" is displayed, and press
ENTER.
3. Either "Celsius" or "Fahrenheit" will be displayed, use the UP
and DOWN buttons to switch between.
4. Press ENTER to confirm your selection or press MODE to exit.
ADJ Products, LLC - www.adj.com - 7PZ IP User Manual Page 27
Operating Instructions
Advertisement
