Intel Quark SoC X1000 Software User's Manual page 39

Board support package (bsp)

Hide thumbs Also See for Quark SoC X1000:

Table of Contents

You will see a display similar to this:

7. You will see a print out, the top line of which looks like this:

fs0

This is your SD card. To mount it, type: fs0:

8. Verify you are using the correct version of CapsuleApp.efi by using the –v

option. You must use version 1.01 or later.

9. Enter the following command:

CapsuleApp.efi Flash.cap

You must enter the full filename of the Flash.cap file.

Note:

May 2017

Document Number: 329687-011US

:HardDisk - Alias hd7b blk0

Intel® Quark™ SoC X1000 Board Support Package (BSP)

Build and Software User Guide

Table of Contents