Part 1 Of 2 - Building The Bsp Software - Intel Quark SoC X1000 Software User's Manual

Part 1 of 2 - Building the BSP Software

This section contains the following chapters:
2.0 Before You Begin ............................................................................................................................................... 8
3.0 Downloading Software .................................................................................................................................... 9
4.0 Building the EDKII Software ....................................................................................................................... 10
5.0 Building the GRUB OS Loader [Linux* Build Environment Only] .............................................. 17
6.0 Creating a File System and Building the Kernel Using Yocto Project* .................................... 19
7.0 Building the Linux* Cross Compile Toolchain Using Yocto Project* [Linux Build
Environment Only] ......................................................................................................................................... 28
8.0 Creating a Flash Image for the Board [Linux* build environment only] ................................. 31
9.0 Platform Data Tool ......................................................................................................................................... 33
10.0 Programming Flash on the Board Using Serial Interface .............................................................. 36
11.0 Programming Flash on the Board Using DediProg .......................................................................... 42
12.0 Booting the Board From SD Card ............................................................................................................ 43
May 2017
Document Number: 329687-011US
Intel® Quark™ SoC X1000 Board Support Package (BSP)
Build and Software User Guide
7