Intel Quark SoC X1000 Software User's Manual page 35

Board support package (bsp)

Hide thumbs Also See for Quark SoC X1000:

Table of Contents

# cd -

This creates a Flash+PlatformData.bin file to be programmed on the board, as

well as a sample-platform-data.pdat file containing the same data that was

inserted in the Flash image.

To program your board using Dediprog, skip to

If creating Flash+PlatformData.bin and the sample-platform-data.ini

Note:

placed UEFI Secure boot certificates in the patched binary file then the generated

sample- platform-data.pdat must be used as one of the capsule images placed

in the recovery FVMAIN.fv file (see

be recovered.

By default EDKII firmware will not update the MAC address in the platform data area if

programming an EDKII capsule (refer to the Intel® Quark™ SoC X1000 UEFI Firmware

Writer's Guide).

May 2017

Document Number: 329687-011US

Section

11.0.

Section

8.0), to allow the UEFI Secure boot system to

Intel® Quark™ SoC X1000 Board Support Package (BSP)

Build and Software User Guide

Table of Contents