Machine Maintenance; Filter Maintenance; System Maintainer - Mytee Lite 8070 User Manual

3 - MACHINE MAINTENANCE

In order to keep the Mytee Lite™ running smoothly and
reduce the risk of damage to the machine and subsequent
downtime, Mytee recommends following the maintenance
schedule below:
Maintenance Item
Clean and inspect tanks.
Clean and inspect hoses.
Check and clean internal filters.
Check power supply cable.
Clean machine with all-purpose
cleaner and cloth.
Check spray nozzles.
Flush solution system with Mytee

System Maintainer.

Inspect vacuum hoses for holes and
loose cuffs.
Inspect spray pattern for clogging.
If clogged, remove spray tips and
soak them in a recommended liquid
neutralizer for up to six hours. To re-
move spray tip, twist spray tip body
counter-clockwise.
Lubricate wheels with water resis-
tant oil.
Inspect machine for water leaks and
loose hardware.

3.1 - Filter Maintenance

The Mytee Lite™ has a small filter on the top of the vac-
uum stack in the recovery tank. This filter should be
checked and cleaned after each use.
New & Reconditioned Equipment & Parts - www.southeasternequipment.net
Weekly flushing of the solution system with Mytee®
System Maintainer helps keep lines clean and prevents
Daily Weekly
chemical build-up, improving pump life, performance and
X pressure.
X
How to use System Maintainer:
X
1. Mix 1-quart 3601 System Maintainer with 1-quart of
warm water.
X
2. After thoroughly mixing, pour this solution into the solu-
X
tion tank.
X
3. Turn the pump on FIRST, and run solution through your
cleaning tool. NOTE: The jet should be removed from the
X
cleaning tool in order to prevent clogging due to loosening
of deposits in line.
X
4. Next, turn on the heater. If the heater is turned on first,
it will result in a vapor lock, which will affect the machine's
operation.
5. Next, with both the pump and heater on, begin running
X
the solution through the machine. This allows the solution
to break down any build up in the lines.
6. After running all of the solution through the machine, fill
the tank with clean, warm water. Run the water through the
X
machine to clear the solution completely out of the tank &
lines.
X
♦
14
3.2 - System Maintainer
♦