Draining Recovery Tank; Machine Maintenance; Daily Maintenance; Weekly Maintenance - Mytee Grand Prix HP-100 User Manual

HP-100/HP-60

DRAINING RECOVERY TANK

FOR SAFETY: When servicing machine,
unplug cord from wall outlet.
1. Turn machine off and unplug power
cord.
2. Remove solution & vacuum hose
3.Attach 45º-drain elbow to dump valve
and lift up drain valve lever to empty
solution tank.
45º Elbow
MACHINE MAINTENENCE
To keep machine in good working condition,
simply follow machine's daily and weekly
maintenance procedures. Check valves and relief
valves should be replaced annually.
FOR SAFETY: When servicing machine,
unplug cord from wall outlet.

DAILY MAINTENANCE

1. Empty and rinse out solution tank thoroughly.
2. Wipe off power cord and check for damage, replace if
necessary. Coil cord neatly after use.
3. Clean machine with an all purpose cleaner and damp
cloth.

WEEKLY MAINTENANCE

(EVERY 20 HOURS OF OPERATION)
1. Flush solution system with Mytee system
maintainer to dissolve normal chemical buildup.
a. Pour 7.5L (2 gal) of hot water 60°C (140°F)
into solution tank. Add Mytee system
maintainer according to mixing instructions
on bottle
FOR SAFETY: When using machine,
follow mixing and handling instructions on
chemical containers.
b. Operate machine for one minute.
c. Shut off machine and allow
remaining solution to break down
chemical buildup overnight.
d. Next day, spray out remaining
solution and flush system with
11L (3gal) of clean water.
2. Inspect vacuum hoses for holes and loose cuffs.
3. Inspect spray pattern for clogging. If clogged,
remove spray tips and soak them in a
recommended liquid neutralizer for up to six
hours. To remove spray tip, twist spray tip body
counter-clockwise.
4. Lubricate wheels with water resistant oil.
5. Inspect machine for water leaks and loose
hardware.
6. Remove float shut-off screen from recovery
tank and clean.
NOTE: The float shut off screen is not glued on.
Simply pull it off.
www.unoclean.com
7