Alam Code; 1Punch Waste Case Full; Punch Waste Case Full; 2Punch Waste Case Overflow - Canon Finisher-Q1 Service Manual

Chapter 5

5.4 Alam Code

5.4.1 Punch Waste Case Full

Fault
The punch waste
case is full.

5.4.2 Punch Waste Case Overflow

Fault
The punch waste
case has started to
overflow.
5-4
T-5-3
Description Timing of detection
-With the punch at time of a punching
waste sensor on, an session
attempt is made at
punching.
T-5-4
Description Timing of detection
After a punch at time of a punching
waste case full session
condition has
been detected,
the sensor has
gone on as long
as 300
punching
operations are
executed.
-The punch
waste sensor is
on at the rising
edge of the 24-
V power
system. (The
machine will
assume that the
waste case is
missing.)
0008-2059
Resetting
Remove the
punch waste
from the case
found in the
compartment.
0008-2061
Resetting
Remove the
punch waste
from the
waste case in
the
compartment.