Operations; Connection; Diagnose - Launch Creader V+ User Manual

LAUNCH

4. Operations

4.1 Connection

1) Turn the ignition off.
2) Locate the vehicle's 16-pin Data Link Connector (DLC).
3) Plug the OBDII cable into the vehicle's DLC.
4) Turn the ignition on. Engine can be off or running.
5) After finishing, press [
CAUTION: Don't connect or disconnect any test equipment with ignition on
or engine running.

4.2 Diagnose

Select [Diagnostic] in Main Menu and press [
Status interface as following figure 4-2:
] button to enter Main Menu as following figure 4-1:
Figure 4-1
Figure 4-2
11
Creader V+ User's Manual
], the screen will display Monitor