Specifications; Accessories; Power Supply - Launch Creader V+ User Manual

LAUNCH
3 LCD DISPLAY
4 EXIT BUTTON
5 UP BUTTON
6 ENTER BUTTON
7 RIGHT BUTTON
8 DOWN BUTTON
9 LEFT BUTTON
10 USB PORT

3.2 Specifications

1) Screen: 2.4" TFT, 176*220 dots LCD display
2) Input voltage range: 9 ~ 18V
3) Operating temperature: 32°F~122°F / 0°C~50°C
4) Storage tempetature: -4°F~158°F / -20°C ~70°C @ RH60%
5) Outline dimension: 120*75*20 mm (L x W x H)
6) Weight : <17.6 oz (500g)

3.3 Accessories

1) User's Manual -- Instructions on tool operations
2) USB cable -- Connect to a computer for upgrading online

3.4 Power supply

The power of the Creader V+ is provided via the vehicle Data Link Connector
(DLC). Follow the steps below to power it up:
1) Find DLC on vehicle
A plastic DLC cover may be found for some vehicles and you need to
remove it before plugging the OBDII cable.
2) Plug the connector at the end of OBD II cable to the vehicle's DLC.
Creader V+ User's Manual
Indicates test results.
Returns to previous menu.
Move cursor up for selection.
Confirms a selection (or action) from a
menu list.
Move cursor right for selection; Or turn
page down when more than one page is
displayed.
Move cursor down for selection.
Move cursor left for selection; Or turn
page up when more than one page is
displayed.
Connects to computer to update the
Creader V+ online.
8