Tool Setup - Launch Creader V+ User Manual

LAUNCH

3.5 Tool Setup

Select [Tool Setup] in the Main Menu and press [
interface as shown below:
The Creader V+ allows you to make the following settings:
1) Select language: Selects desired language.
Choose [Language] and press [
shown below:
You can press [ ] [ ] key to select any language and press [
system will convert to the chosen language interface at once.
2) Set measurement unit: allows you to define the measurement unit.
Choose [Unit of Measure] and press [
shown below:
Figure 3-2
], the screen will display the interface as
Figure 3-3
], the screen will display the interface as
9
Creader V+ User's Manual
], the screen will display the
] to confirm. The