Power On / Power Off X-431 Padii; Power On; Power Off; Tips On Finger Operations - Launch X-431 PADII User Manual

LAUNCH

3.3 Power On / Power Off X-431 PADII

3.3.1 Power on

Press the POWER key to turn on X-431 PADII.
Note: If it is the first time you use X-431 PADII or X-431 PADII
keeps idle for a long time, X-431 PADII could fail to be turned on. It
results from low battery. In this case, please recharge your X-431
PADII for a while and try to turn it on.

3.3.2 Power off

1. Press the POWER key, an option menu will pop up on the screen.
2. Tap "Power off" to turn off X-431 PADII.

3.4 Tips On Finger Operations

Actions Results
Single-tap To select a item or launch a program.
To zoom in so that the text on a webpage appears
Double-tap
in a column that fits your device's screen.
Press and hold on the current interface or area
Long press until a contextual menu pops up on the screen,
and then release it
Slide To jump to different pages.
Drag Tap the desktop icon and drop it to other location.
To zoom in manually, place two fingers on the
Spread apart / screen and then spread them apart. To zoom out,
Pinch together place two fingers apart on the screen and then
pinch them together.
8

3.5 Lock / Unlock the screen

Many screen lock modes are available on X-431 PADII. Take the
preset screen-lock mode as example for demonstration.

3.5.1 Lock the screen

• When X-431 PADII is ON, press POWER key once to lock the
screen;
• The system will lock the screen automatically after X-431 PADII
remains idle over the preset standby time.

3.5.2 Unlock the screen

Press POWER key to activate the screen, and then drag the lock to
"Unlock" position.
Notes:
1. In case you forgot the screen lock, please refer to Appendix - FAQ
for details. You are not suggested to use the screen lock.
2. If you use unlock pattern, you have to draw the right target pattern
to unlock it.
X-431 PADII User's Manual