Launch Creader V+ User Manual page 7

LAUNCH Creader V+ User's Manual
poisonous.
Put blocks in front of the drive wheels and never leave the vehicle
unattended while running tests.
Use extreme caution when working around the ignition coil, distributor cap,
ignition wires and spark plugs. These components create hazardous
voltages when the engine is running.
Put the transmission in P (for A/T) or N (for M/T) and make sure the parking
brake is engaged.
Keep a fire extinguisher suitable for gasoline/chemical/ electrical fires
nearby.
Don't connect or disconnect any test equipment while the ignition is on or
the engine is running.
Keep the Creader V+ dry, clean, free from oil/water or grease. Use a mild
detergent on a clean cloth to clean the outside of the Creader V+, when
necessary.
vi