Launch Creader V+ User Manual page 25

LAUNCH
You can use [ ] [ ] button to view other data streams.
Press [ ] to return to Diagnostic Menu.
Select [Select Items] in Data stream menu and press [
the interface as shown below:
You can use [ ] / [ ] button to select data stream items, and press [ ] / [ ]
button to turn page.
After selecting items, press [
items.
To select all datastream of the current page, highlight the first line and then press
], √ will appear before all items. To deselect all, just press [
[
If [View Graphic Items] is selected in Datastream menu and press [
the graphic items selection screen.
Press [ ] / [ ] button to select single data stream items, and press [
Figure 4-13
Figure 4-14
], the screen will display the selected datastream
17
Creader V+ User's Manual
], the screen will display
] again.
] to enter
] button,