Read Codes - Launch Creader V+ User Manual

LAUNCH
Press [ ] to enter the Diagnostic Menu, the screen will display as following
figure 4-3:

4.2.1 Read Codes

Select [Read Codes] and press [
Figure 4-4 will pop up:
Press [ ] to enter to select the manufacturer. Figure 4-5 will be shown on the
screen. Press [ ] / [ ] to select different items; press [ ] / [ ] to turn to next or
previous page. After selecting the desired one, press [
Figure 4-3
] in Diagnostic Menu. A screen similar to
Figure 4-4
12
Creader V+ User's Manual
] to confirm.