Launch X-431 PADII Quick Start Manual

X-431 PADII
Front & Side View
Micro SD Card Slot
1
USB Port
Power Button
Mini HDMI Port
Front Camera
Volume Buttons
Reset Button
golo Button
(For quick access to Instant
Messaging application)
X-431 PADII Professional Tablet
*Note1:
USB Port is reserved for add-on
modules, and other USB devices use
only.
Micro USB Port is reserved for Micro
USB cable only.
*Note2: It illuminates red while
X-431 PADII tablet is charging.
Once charging is finished, it will
turn green.
Pictures illustrated here are for reference purpose only and this Quick Start Guide is subject to change without notice.
Quick Start Guide (EN)
Headphone Jack
DC Input Port
1
Micro USB Port
2
Charging Indicator
IPS Touch Screen
Microphone
Charging Slot
Camera Flash
Handgrip
Rear Camera
Audio Speakers
Rear View
Accessory Checklist
X-431 PADII Unit Docking Station
(A tablet for showing (See Section "Docking
test results.) Station" on Page 2.)
Power Adaptor Cigarette Lighter
(To supply power to the
(To supply power to
non-16pin connector via
the tablet.)
vehicle's cigarette
lighter socket.)
HDMI Cable Battery Clamps Cable OBDII Extension Cable
(To connect to an
(To provide power to the
external projector or
non-16pin connector
monitor with HDMI through connection to
interface.) the vehicle's battery.)
OBDI Converter Password Envelope
(A piece of paper bearing
(A converting cable
Product S/N and Register
for connecting
Password, which is
non-16pin connector.)
required for your
registration.)
LAUNCH
Diagnostic Connector
(A device for
accessing vehicle data.)
USB Cable
(To connect the
diagnostic connector
and the display tablet.)
(To connect the
diagnostic connector
for extension purpose.)
Non-16pin Connector
(Optional)
(For detailed non-16pin
connectors, please check
the package)