Tool Setup - Launch CR-HD User Manual

LAUNCH

4.3 Tool Setup

Select [Tool Setup] in the main menu and press [
following screen:
1) Beeper: Turn ON/OFF the Beeper.
Select [Beeper] in the main menu and press [
as below:
The icon will appear at bottom of the screen if Beeper is set to ON.
2) Time and Date: Set time and date.
Select [Time and Date] in the main menu and press [
screen, as shown in Figure 4-23.
], the system will enter the
Figure 4-21
] to switch to the screen shown
Figure 4-22
14
CR-HD User's Manual
] to enter the setting