Acquiring A Scout Image - Vatech PaX-i3D User Manual

8 Acquiring CT Images
120
C. CT vertical laser beam: Position the CT vertical laser beam at the center of
FOV from the patient's lateral.
Completing Patient Positioning
B. Click the READY button after the patient has been properly positioned. No
X-ray will be emitted at this point.
If, for the FOV size of 50 x 50 or 80 X 50, the SCOUT image is to be acquired,
click the SCOUT button.
SCOUT capture is featured in FOV size 50 X 50 and 80 X 50.
In case of abnormal patient's arch, the chinrest height
adjustment through the SCOUT feature enables the user
to acquire better image. For details about imaging in the
NOTE
SCOUT mode, refer to the section "8.3 Acquiring a Scout
Image".
C. Proceed to the section 8.4 Initiating X-ray Exposure. But if the SCOUT
feature is selected, continue to the next section 8.3 Acquiring a SCOUT
Image, to the section 8.4 Initiating X-ray Exposure.
A. After confirming patient positioning
and beam alignment, adjust the temple
supports to fit snugly on both sides of the
patient's head using the temple support
adjustment button.
PaX-i3D Green (PHT-60CFO) User Manual