Installation Safeguards - Gfp 865DH-4 Operating Manual

3. Installation Safeguards

 Shipping damage should be brought to the immediate attention of the delivering carrier.
 Avoid locating the laminator near sources of heat or cold. Avoid locating the laminator
in the direct path of forced, heated or cooled air.
 The receptacle must be located near the equipment and easily accessible.
Connect the electrical plug provided with the laminator to a suitably grounded
outlet only. This machine must have reliable earth ground to ensure the safety of the
machine during operations.
Contact an electrician should the electrical plug provided with the laminator not match
the receptacles at your location.
Ensure that the voltages of the power supply you are using match the rated
working voltages before operations. Do not use incorrect power supply.
Do not use damaged wires or outlets. If abnormal conditions occur, switch off
the power supply first.
This machine must be grounded reliably to ensure safe operation.
Only a licensed electrician should install wiring and outlet for the laminator.
To ensure safe operation, do not defeat or remove electrical or mechanical safety
devices such as interlocks, shields, guards and photo eyes.
This machine is equipped with a heating system; do NOT touch the surface of
rollers during thermal operations to avoid burns.
Gfp 865DH-4
4
March 2021