Introduction; Important Safety Instructions; Installation Safeguards - Gfp 563TH-4 Operating Manual

1. Introduction

Thank you for choosing the Gfp 563TH laminator. It has been designed and manufactured to provide
years of continuous service. Please read this manual thoroughly before operating. Please inspect the
box and the laminator for shipping damage. Damage should be brought to the attention of the
delivering carrier immediately
We reserve the right to make changes to this publication and to the products described in it without
notice. The details given in this manual are based on the most recent information available to us. They
may be subject to change in the future. We retain the right to make changes to the construction or the
design of our products without accepting any responsibility for modifying earlier versions
WARNING! Any unauthorized changes or modifications to this unit without our prior written
approval will void the user's warranty and will transfer health and safety obligations to the end user.
CAUTION!
information is vital to preventing user injury and/or damage to the unit. Failure to follow this
information could void the user's warranties and transfer all safety obligations to the user.

2. Important Safety Instructions

In this operating manual, you will find important safety messages regarding the product.
Read these instructions carefully, failure to comply with the following safety procedures could result in
serious injury.
WARNING Do not attempt to service or repair the laminator. Only authorized maintenance and service
technicians should make repairs.
WARNING Do not connect the laminator to an electrical supply or attempt to operate the laminator
until you have completely read these instructions. Maintain these instructions in a
convenient location for future reference.
WARNING To guard against injury, the following safety precautions must be observed in the
installation and use of the laminator

3. Installation Safeguards

• Shipping damage should be brought to the immediate attention of the delivering carrier
• Avoid locating the laminator near sources of heat or cold. Avoid locating the laminator in the
direct path of forced, heated or cooled air
• The receptacle must be located near the equipment and easily accessible.
Connect the attachment plug provided with the laminator to a suitably grounded outlet
•
only. This machine must have reliable earth ground to ensure the safety of the machine during
operations
Gfp 563TH-4
Please pay attention to all passages with these symbols. This
3