Installation Safeguards - Gfp 455 TH Operating Manual

3. Installation Safeguards

• Shipping damage should be brought to the immediate attention of the
delivering carrier
• Avoid locating the laminator near sources of heat or cold. Avoid locating
the laminator in the direct path of forced, heated or cooled air
• The receptacle must be located near the equipment and easily accessible.
Connect the attachment plug provided with the laminator to a
•
suitably grounded outlet only. This machine must have reliable earth wire
to ensure the safety of the machine during operations
• Contact an electrician should the attachment plug provided with the
laminator not match the receptacles at your location
Ensure that the voltages of the power supply you are using match the rated
•
working voltages before operations. Do not use incorrect power supply
Do not use damaged wires or sockets. If abnormal conditions occur, switch
•
off the power supply first.
Only a licensed electrician should install wiring and outlet for the
•
laminator
• Do not defeat or remove electrical and mechanical safety equipment such as
interlocks, shields and guards
Gfp 400 Series
4
January 2011