Table 40-15: Ip Group Parameters - AudioCodes Mediant 8000 Installation, Operation & Maintenance Manual

6.
Configure the IP Groups parameters according to the table 'IP Group Parameters'
below.
7.
Click the Maintenance icon
configuration.
Parameter Name
Name String
Up to 20 chars.
IP Group Type Enum
Server, User,
Gateway
Installation & Operation Manual

Table 40-15: IP Group Parameters

Type Provisioning Type
Instant
Instant
612
, and then select Unlock to activate the
User-defined name (Textual),
assigned to the IP Group, enabling
users to identify it intuitively and
easily.
The IP Group type:

SERVER – used when the
destination address (configured
by the Proxy Set) of the IP
Group (e.g., ITSP, Proxy, IP-
PBX, or Application server) is
known.

USER – represents a group of
users (such as IP phones and
softphones) where their location
is dynamically obtained by the
device when REGISTER
requests and responses
traverse (or are terminated) by
the device. These users are
considered remote (far-end)
users.
Typically, this IP Group is
configured with a Serving IP
Group that represents an IP-
PBX, Application or Proxy
server that serves this USER-
type IP Group. Each SIP
request sent by a user of this IP
Group is proxied to the Serving
IP Group. For registrations, the
device updates its internal
database with the AOR and
contacts of the users.
Digest authentication using SIP
401/407 responses (if needed)
is performed by the Serving IP
Group. The device forwards
these responses directly to the
SIP users.
To route a call to a registered
Mediant 8000
Description
Document # LTRT-92224