Srd Table - AudioCodes Mediant 8000 Installation, Operation & Maintenance Manual

40.10

SRD Table

The Signaling Routing Domain (SRD) is a set of definitions of IP interfaces, resources,
SIP behaviors and other definitions that partition a single SIP board into multiple
virtual multi service gateways.
SRD provides the following capabilities:

Provides different SIP signaling (SRD associated with a SIP Interface) and RTP
media (associated with a Media Realm) interfaces for multiple Layer-3 networks

Enables separation of SIP signaling traffic between different customers; multiple
gateway customers may reside either in the same or different Layer-3 networks
as the device.
Once configured, the following actions can be performed on the SRD:

Associate to a SIP Interface (see 'SIP Interfaces Table' on page 630)

Associate to an IP Group (see 'IP Groups Table' on page 611)

Associate to a Proxy Set (see 'SIP Proxy Settings Table' on page 547)

Define as a Classification parameter to associate the incoming SIP request with a
specific IP Group (see 'Source IP Group Classification' on page 745)

Define as an IP to IP Destination rule (see 'SBC Routing' on page 745)

Apply an Admission Control rule to a specific SRD (see 'SBC Admission Control'
on page 768).
Installation & Operation Manual 628
Mediant 8000
Document # LTRT-92224