Table of Contents
Advertisement
Installation & Operation Manual
19.2
Connecting the T3 PSTN Interfaces
T3/DS-3 PSTN cables are connected to the 6310/RTM module in the rear of the
chassis. Three T3/DS-3 interfaces are provided on each 6310/RTM module.
Use a proper cable with MOLEX PN: 73100-0255 or the equivalent mini-SMB male
connector.
Figure 19-2: T3 - Male Connector MOLEX PN: 73100-0255
19.3
Connecting E1/T1 PSTN Cables (TP-8410 Boards)
E1/T1 PSTN cables are connected to the 8410/RTM module in the rear of the chassis.
Two SCSI interfaces are provided on each 6310/RTM module for connecting up to 42
E1/T1 trunks.
Use proper cables for connecting E1/T1 trunks. For more information, refer to Cables
on page
Version 6.6
92.
19. Connecting to the PSTN Network
125
October 2014
Advertisement
Table of Contents
Troubleshooting
