Mediant - AudioCodes Mediant 8000 Installation, Operation & Maintenance Manual

AD Object
MOBILE
LDAP_ERR
c.
d.
4.
For the SBC application: Configure AD-based IP-to-IP routing rules:
a.
b.
c.
AD Object
PRIVATE
OCS
PBX
MOBILE
LDAP_ERR
d.
e.
Installation & Operation Manual
Mobile number
LDAP query failure
Configure a routing rule for routing the initial Tel call to the LDAP server,
using the value "LDAP" for denoting the IP address of the LDAP server.
For alternative routing, enable the alternative routing mechanism and
configure corresponding SIP reasons for alternative routing. For this feature,
alternative routing starts from the table row located under the LDAP query
row.
Open the IP-to-IP Routing Table.
Select the relevant VoIP board, and then open the IP-to-IP routing table (SIP
SBC SBC Routing
Configure query-result routing rules for each IP domain (private, PBX / IP
PBX, Lync / OCS clients, and mobile), using the LDAP keywords (case-
sensitive) in the Destination Username Prefix field:
Table 40-27: Destination Username Prefixes
Private number
Lync / OCS client number
PBX / IP PBX number
Mobile number
LDAP query failure
Configure a routing rule for routing the initial call (LDAP query) to the LDAP
server, by setting the 'Destination Type' field to LDAP for denoting the IP
address of the LDAP server.
For alternative routing, enable the alternative routing mechanism and
configure corresponding SIP reasons for alternative routing. For this feature,
alternative routing starts from the table row located under the LDAP query
row.
Description
IP-to-IP Routing Table).
Description
646

Mediant 8000

Document # LTRT-92224