Table of Contents
Advertisement
FS-900 JVC Triple Studio Camera Interface System Components
MultiDyne FS-900 Triple Studio
Camera Interface System for JVC's
GY-HM890 ProHD camcorde
The MultiDyne® Pro HD camera-mounted
fiber-optic transceivers are used to "systemize"
HD, 2K and 4K Quad-Link 3G camcorders. It offers
versatility and the ability to configure a camera
system to specific applications. The camera is con-
nected with a series of short patch cables
and then connected to the system's base station
(RX) with a single fiber-optic cable, which can be
located near the camera or miles away.
The FS-900BS1N (Neutrik Opticalcon)
and FS-900BS1S (SMPTE)
Supports 3G-SDI 1080p/60 camera feeds and
returns, and takes advantage of the camera's built-
in streaming engine for video-over-IP functionality.
Cost-efficient to support up to three cameras by
each base station, and redundant power supplies
provide up to 150 watts for each camera, as well as
prompters and
talent monitors.
Hybrid fiber cable for Neutrik and SMPTE
Hybrid fiber cable assemblies are compatible for easy mating to industry standard broadcast camera systems.
The rigorous qualification and intermateability testing program guarantees consistent and reliable results with
all compliant systems.
10
Key Features
•
Supports 1080 50/60p 3G-SDI camera feed
and returns.
•
HDMI / SDI feeds for high-quality HD
teleprompters.
•
Gigabit Ethernet for Video-over-IP and
web-based RCU.
•
Dual redundant power supplies for
base station
Detailed Description: Camera Head Unit - Connectors
1
Battery Connector:
1.
Anton Bauer Gold mount or V mount
Fiber-Optic Connector:
2.
Use either SMPTE or Neutrik cable (depending
on option ordered) to connect to Base Unit.
3. Return 3 Video—HDMI Output Connector:
The Return 3 video channel sent from the Base
Unit to the Camera Head that has been converted
from SDI to HDMI inside the Camera Head Unit is
output on this HDMI connector.
4.
Viewfinder Video—BNC Output Connector:
The video output on this connector is either the
SDI video coming in from the Camera or the
Return 1 video channel sent from the Base Unit
depending on which input is selected via the
Viewfinder Input Select Switch (#14 on page 12)
3
4
5
5
5
6
7
2
9
8
10
Return 1, 2, 3 Video—BNC Output Connector:
5.
The Return video channel input into and sent
from the Base Unit to the Camera Head is output
on these BNC connector.
6.
Auxiliary Power Output 1 & 2 Connectors
7.
External Tally/GPIO Connector:
See Table 2 for pinout assignments.
Program Audio Output Connector:
8.
See Table 3 for pinout assignments.
Ethernet Connector:
9.
Use to connect Camera Head Unit to Ethernet.
10.
Intercom Headset Connector:
See Table 4 for pinout assignments
11
Advertisement
Table of Contents
