Shooting Assist Menu Screen - JVC ViewFinder VF-HP840U Instructions Manual

Menu
Menu screen content
(continued)

SHOOTING ASSIST Menu Screen

Settings in bold are factory default settings.
Item
FOCUS ASSIST
LEVEL
ZEBRA
TOP1
BOTTOM1
TOP2
BOTTOM2
PEAKING FREQ.
PAGE BACK
14
Setting Value
RED This item sets the display color of the focus section when the FOCUS ASSIST
GREEN
function is operated.
BLUE
RED
GREEN : Displays the focus section in green.
BLUE
Note ：
● When connected to GY-HD250U and [VF SIGNAL] is set to ARGBB at the
LOW This item sets the focus level during the FOCUS ASSIST operation.
MIDDLE LOW
MIDDLE : Emphasizes the focus section.
HIGH
HIGH
OVER Select whether to display Zebra and the display format.
1PATTERN OFF
1PATTERN
2PATTERNS
2PATTERNS
5 % ~ 80 % ~ 100 % This item sets the upper limit of the brightness of Zebra 1.
OVER 5 % ~ 100 %
OVER
Note ：
● When [ZEBRA] is set to AOFFB, [----] will be displayed and setting is disabled.
0 % ~ 70 % ~ 100 % This item sets the lower limit of the brightness of Zebra 1.
0 % ~ 100 %: Displays the brightness above this setting as Zebra. (The value
Note ：
● When [ZEBRA] is set to AOFFB, [----] will be displayed and setting is disabled.
5 % ~ 100 % This item sets the upper limit of the brightness of Zebra 2.
OVER 5 % ~ 100 %
OVER
Note ：
● When [ZEBRA] is set to AOFFB or A1PATTERNB, [----] will be displayed and
0 % ~ 80 % ~ 100 % This item sets the lower limit of the brightness of Zebra 2.
0 % ~ 100 %
Note ：
● When [ZEBRA] is set to AOFFB or A1PATTERNB, [----] will be displayed and
LOW This item sets the frequency band where the contour is emphasized with the
MIDDLE [PEAKING] control.
LOW
HIGH
MIDDLE : Emphasizes the intermediate frequency band.
HIGH
^
This returns to the [MAIN MENU] screen.
: Displays the focus section in red.
: Displays the focus section in blue.
camera LCD/VF MENU screen, set FOCUS ASSIST at the camera to
AOFFB. Settings at VF will be invalid.
: Displays the focus section.
: Further emphasizes the focus section.
: Does not display Zebra.
: Displays the brightness set between [TOP1] and [BOTTOM1] in
Zebra.
: In addition to [1PATTERN], this displays the brightness set
between [TOP2] and [BOTTOM2] in Zebra.
: Displays the brightness below this setting as Zebra. (The value
can be set in intervals of 5 %.)
: Cancels the upper limit of the brightness of the displayed Zebra.
can be set in intervals of 5 %.)
: Displays the brightness below this setting as Zebra. (The value
can be set in intervals of 5 %.)
: Cancels the upper limit of the brightness of the displayed Zebra.
setting is disabled.
: Displays the brightness above this setting as Zebra. (The value
can be set in intervals of 5 %.)
setting is disabled.
: Emphasizes the low frequency band.
: Emphasizes the high frequency band.
Description