Bosch Praesideo Service Manual page 35

Praesideo| Service manual | Chapter
•
Press simultaneously the keys <Ctrl> and <X> and notice how your Praesideo system performs a
restart. As soon as the line "Press any key to stop auto-boot..." is shown on the HyperTerminal screen
press any key. (You will have to be quite fast for that)
The command prompt [VxWorks Boot] will appear.
•
Press <C> (for configuration) and press <Enter>, than fill in the (case sensitive) values shown below.
If a setting is already displayed correct, press <Enter>.
•
To clear a field press "."
•
Put a "0" behind every line to be sure no hidden characters could be there.
•
Use "-" to go to the previous field.
Use your own IP address and gateway settings of course.
When you want to get back to the [VxWorks Boot] prompt, press <@> to accept and start up with the
new settings.
Now you should be able to regain access to your system.
Bosch Security Systems | 2004-28 | 3922 880 62312
en | 35