Table of Contents
Advertisement
Item no
Type of chair
Etac Transit
35 cm
13140301
40 cm
13140305
45 cm
13140309
50 cm
13140311
55 cm
13140317
Measures and weights given are for a chair with 16" rear wheel, 200x50 solid castor wheel. Measure tolerance ± 2%
Max tilt up
Max lateral tilt
(excl anti-tip)
>20°
Tests and guarantees
Crash test:
Etac's wheelchairs are tested in accordance with ISO 7176-19.
They are crash tested at the Technical Research Institute of
Sweden. The tests were carried out with an UNWIN_WWR/ATF/K/R
restraining device and a 907523, Klippan Safety AB 3-point seat
belt.
Service life:
The product is tested and fulfils the demands stated in EN
12183. The main product's durability and lifetime is at least five
years when used in accordance with intended use, the safety
instructions, the reconditioning manual and instructions for use
in the user manual. The main product consists of the chassis for
seat and back support. Additional parts/accessories are handled
in accordance with the manual and reconditioning manual. The
actual lifetime can vary, depending on how much and how inten-
sively the product is being used, but a maximum of 10 years.
Thereafter the product must be decommissioned.
Methods of surface treatment:
Lacquered surfaces = Polyester powder coating or ED-coating
Non-lacquered aluminium parts = Anodized coating
Non-lacquered steel surfaces = Galvanized
8. Technical data
Seat height
Total width
rear
500 mm
490 mm
550 mm
490 mm
600 mm
490 mm
650 mm
490 mm
700 mm
490 mm
Max tilt
down
>16°
9°
Seat depth
Seat height
from back-
front
rest tube
480-510
420 mm
mm
480-510
420 mm
mm
480-510
420 mm
mm
480-510
420 mm
mm
480-510
420 mm
mm
CE marking:
The product has passed all tests and met all criteria set by
European standards for specific product groups. Combination
agreements exist, see www.etac.com
Guarantee:
5 year guarantee against material and manufacturing defects.
For terms and conditions, see www.etac.com
Special adaptations:
comprise everything that falls outside the instructions and settings
in this Manual. Wheelchairs specially adapted by customers are
not eligible for Etac's CE marking. Etac's guarantee no longer
applies. If in the least doubt about the validity of adjustments,
please contact Etac for advice.
If wheelchair is combined with another product not manufac-
tured by Etac, neither of the products will retain their CE marking
unless combination agreement exists. Please contact Etac for
up-to-date information.
To be sorted according to national regulations
Weight
Backrest
Transport
with rear
height
width
wheel
400-475
250 mm
16,8 kg
mm
400-475
250 mm
16,9 kg
mm
400-475
250 mm
17,0 kg
mm
400-475
250 mm
17,1 kg
mm
400-475
250 mm
17,2 kg
mm
Max
user weight
135 kg
135 kg
135 kg
135 kg
135 kg
Advertisement
Chapters
Table of Contents
