Table of Contents
Advertisement
Product description:
Etac Prio (hereafter called Prio) is a manual wheelchair with a seat
and back support with ergonomic features. The seat and back
support with ergonomic features are available with both manual or
electrical operation. Prio offers great opportunities for customisations
via settings and configurable parts. Prio is designed for indoor and
outdoor use. Prio has fixing points for motor vehicle transport. Prio is
intended for reuse.
Intended use:
Prio is designed to be adapted to cater to the user's individual abilities
and needs. The back support and seat's ergonomic features provide
a relaxing and comfortable resting position, as well as support during
active sitting.
Prescriptions should be undertaken by a responsible clinician. The
wheelchair should be adapted and adjusted by a trained healthcare
professional.
Intended user:
Prio is designed for users with physical disabilities who require a
variety of seated positions. Prio can be used without an assistant
if the user can independently understand its features, as well as
self-propel and brake without assistance. Prio is designed for hand
and/or foot propulsion. The wheelchair is designed based on users
of adult size with a body height from 140 cm. The wheelchair is
also suitable for amputees. The wheelchair is not usually suitable
for small children. Maximum permissible user weight, dimensions
and weights are stated in the technical data. The wheelchair's field
of application is not restricted to a specific diagnosis. There are no
known contraindications.
CE marking, tests:
The product conforms to the requirements of the Medical Devices
Regulation (EU) 2017/745.
The product has been tested and meets the requirements of EN
12183, which includes fire testing in accordance with ISO 8191-2.
Combination agreement is available, see www.etac.com.
The product is crash tested at RISE, Research Institutes of Sweden,
according to ISO 7176-19. The tests have been carried out with clamping
device UNWIN_WWR/ATF/K/R and with three point strap 907523, Klip-
pan Safety AB.
The tested product was equipped with:
The parking brakes activated
Anti-tip guards activated
Head support mounted
Handrims on the rear wheels (not 16" wheel)
Symbols and warnings
These symbols occur on labels and in the user manual.
Securing. Fixing points for
the clamping system for
transport in motor vehicles.
General warnings
The following must be taken into consideration during use.
Bright sunlight could heat parts of the chair and cause burns.
After adjusting the seat height, centre of balance or back sup-
port angle, always ensure that you check the function of the
anti-tips.
Warning: This product can be adjusted beyond safe use.
The prescription of the product must be done by medical per-
sonnel and tested by a specialist.
1. General
Service life:
The expected duration and service life of the main product is at least
five years when used in accordance with its intended use, safety
instructions, reconditioning manual and maintenance instructions in
the manual. The main product is covered by seat and back chassis.
Remaining parts/accessories are handled in accordance with the
manual and reconditioning manual. The actual service life may vary
depending on how much and intensively the product is used, but is a
maximum of 10 years. If the product is intended to be used after the
service life specified by Etac, it is incumbent on the product owner
to ensure the product's performance in accordance with the manual
and reconditioning instructions. If this cannot be ensured, the product
must be taken out of service.
The following surface treatment methods have been used:
Varnished surfaces = Powder-applied polyester or ED varnish
Unvarnished aluminium parts = Anodizing
Unvarnished steel surfaces = Galvanized
Warranty:
5 year warranty against defects in material and manufacture. For
conditions, see www.etac.com.
Customization:
is everything that goes beyond the manual's instructions and settings.
Wheelchair specially adapted by the customer must not retain Etac's
CE marking. Etac's warranty expires. If there is any uncertainty
regarding the execution of the customization, consult Etac.
Wheelchairs coupled with another product may not retain either
product's CE mark unless combination agreements exist. Contact Etac
for current information.
Reutilization:
Etac Prio can be reused. Follow the instructions in "Reconditioning
instructions, Etac manual wheelchairs" at www.etac.com.
Tools:
Allen key
3, 4, 5, 6 mm
2. Safety
Risk of tipping: Always keep
the anti-tips folded down.
The chair might tip if the incline at the rear is greater than 6°.
Use anti-tips!
In case of an adverse event occurred in relation to use of the device,
it should be reported to your local dealer and the national competent
authority in a timely manner. The local dealer will forward information
to the manufacturer.
3
Etac / Prio / www.etac.com
Ring spanner
Socket spanner
8, 10, 13, 17, 24 mm
Do not lift the chair by
removable parts
19 mm
Advertisement
Table of Contents
