Readjustments; Attendant Brake; Continuously Angle-Adjustable Legrest (Option); Amputee Legrest (Option) - Etac Transit Manual

Attendant brake

To adjust the brakes, loosen nut (A). Loosen/tighten screw (B) in
order to reach proper brake function. Tighten the nut (A). This
adjustment should be done when the brakes are not working
properly.
Leg support, infinitely angle adjustable
Never stand on the footrests as you may tip
the chair! For lifting a wheelchair. swing in the
legrests under the seat, or remove them, and lift
using the frame (lower or upper part).
Always have the screw and knob for footrest
attached even if not using footrest.
Amputee leg support
Never sit on the amputee legrest. When lifting
the wheelchair, remove the amputee legrest,
swing the other legrest in under the seat (or
remove it) and lift using the frame (lower or
upper part).
Amputee support is settable in height and sideways and
adjustable in depth and angle.

6. Readjustments

B
A
1
4 mm
6 mm
8 mm