Power Off; Starting An Exam - GE Medical Systems LOGIQ 7 Quick Manual

LOGIQ 7 Quick Guide

Power Off

To power down the system:
1. Press the Power switch at the front of the
system once.
2. The System-Exit window is displayed.
3. Using the Trackball or Tab key, select
Shutdown.
The shutdown process takes about 30 seconds
(the Power On light is green) and is completed
when the control panel illumination is turned off
(the Power On light is amber).
4. Disconnect the probes.
Clean or disinfect all probes as necessary.
Store them in their shipping cases to avoid
damage.
Direction 2291859-100 Rev. 1

Starting an Exam

You need to select a pre-configured dataflow that
sets up the ultrasound system to work according to
the services associated to the dataflow.
1. Select your Operator Login and type in your
Password:
2. Press Log on.
3. Fill in the New Patient menu as described on
Page 3.
OR,
If the patient name is on the patient record list,
1. Trackball to the patient's name to highlight the
name, (or perform a search to locate the
patient) then press Select Patient.
2