Table of Contents
Advertisement
LOGIQ 7 Quick Guide
Using Probes
Connecting a probe
1. Place the probe's carrying case on a stable
surface and open the case.
2. Carefully remove the probe and unwrap the
probe cable.
3. DO NOT allow the probe head to hang free.
Impact to the probe head could result in
irreparable damage.
4. Turn the connector locking handle clockwise.
5. Align the connector with the probe port and
carefully push into place.
6. Turn the connector locking handle clockwise to
secure the probe connector.
7. Carefully position the probe cable in the probe
cord holder spot so it is free to move, but not
resting on the floor.
Probe Application
Abdomen
Small Parts
Periph. Vasc.
OB/GYN
Pediatrics
Neonatal
Urology
Surgery
Endocavity
Transcranial
Cardiac
Using Probes
Direction 2291859-100 Rev. 1
Activating the probe
Select the appropriate probe from the probe
indicators on the Touch Panel.
The probe activates in the currently-selected
operating mode. The probe's default settings for the
mode and selected exam are used automatically.
Deactivating the probe
When deactivating the probe, the probe is
automatically placed in standby mode.
1. Press the Freeze key.
2. Gently wipe the excess gel from the face of the
probe.
3. Carefully slide the probe around the right side
of the keyboard, toward the probe holder.
Table 1-1: Probe Indications for Use
3C
3.5C
5C
M7C
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Disconnecting the probe
Probes can be disconnected at any time. However,
the probe should not be selected as the active
probe.
1. Move the probe locking handle
2. Carefully slide the probe and connector away
3. Be sure that the probe head is clean before
E8C
7L
10L
i12L
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Ensure that the probe is placed gently in the
probe holder.
counterclockwise. Pull the probe and connector
straight out of the probe port.
from the probe port and around the right side of
the keyboard. Ensure the cable is free.
placing the probe in its storage box.
M12L
3S
10S
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
13
Advertisement
Table of Contents
Need help?
Do you have a question about the LOGIQ 7 and is the answer not in the manual?