IEI Technology WAFER-UTL3 User Manual page 99

Bits per second [115200]
Use the Bits per second option to specify the serial port transmission speed. The speed
must match the other side. Long or noisy lines may require lower speeds.
9600
19200
57600
115200
Data Bits [8]
Use the Data Bits option to specify the number of data bits.
7
8
Parity [None]
Use the Parity option to specify the parity bit that can be sent with the data bits for
detecting the transmission errors.
None
Even
Odd
Mark
Space
Page 86
Sets the serial port transmission speed at 9600.
Sets the serial port transmission speed at 19200.
Sets the serial port transmission speed at 57600.
D Sets the serial port transmission speed at 115200.
EFAULT
Sets the data bits at 7.
Sets the data bits at 8.
D
EFAULT
No parity bit is sent with the data bits.
D
EFAULT
The parity bit is 0 if the number of ones in the data
bits is even.
The parity bit is 0 if the number of ones in the data
bits is odd.
The parity bit is always 1. This option does not
provide error detection.
The parity bit is always 0. This option does not
provide error detection.
WAFER-ULT3/ULT4 3.5" SBC