IEI Technology WAFER-UTL3 User Manual page 115

Quiet Boot [Enabled]
Use the Quiet Boot BIOS option to select the screen display when the system boots.
Disabled
Enabled
UEFI Boot [Disabled]
Use the UEFI Boot option to enable or disable to boot from the UEFI devices.
Enabled
Disabled
Launch PXE OpROM [Disabled]
Use the Launch PXE OpROM option to enable or disable boot option for legacy network
devices.
Disabled
Enabled
Option ROM Messages [Force BIOS]
Use the Option ROM Messages option to set the Option ROM display mode.
Force
BIOS
Keep
Current
Boot Option Priorities
Use the Boot Option Priorities function to set the system boot sequence from the
available devices. The drive sequence also depends on the boot sequence in the
individual device section.
Page 102
Normal POST messages displayed
D OEM Logo displayed instead of POST messages
EFAULT
Boot from UEFI devices is enabled.
D Boot from UEFI devices is disabled.
EFAULT
D Ignore all PXE Option ROMs
EFAULT
Load PXE Option ROMs.
D Sets display mode to force BIOS.
EFAULT
Sets display mode to current.
WAFER-ULT3/ULT4 3.5" SBC