operational instructions
Other Notes:
•
When targets / limits have been reached an alarm will sound.
•
Without any signal for 5 minutes, the LCD display will shut off automatically with all values reset to zero. Press any key or
start cycling to reactivate.
•
The computer is equipped with an auto start / stop device. It will activate when you start to pedal and switch off some
time after you stop pedalling.
•
The mode function will only work when all activity has stopped.
•
If the display becomes faint, replace the batteries.
•
Battery spec: 2 AA size.
Battery replacement instructions:
1.
Open the battery compartment cover (Diagram 1).
2.
Remove battery by pulling the battery in direction of spring and
lift opposite end upwards (Diagram 2).
3.
Insert 2 AA batteries ensuring you match the polarity markings
(+ and -) on the batteries with the indicators in the battery
compartment. Push flat end ( - ) against spring and when clear
push other end into holder.
4.
Close the battery compartment.
Tips & Warnings
•
Always change both batteries at the same time.
•
Always use the same type of batteries.
•
Never recharge Alkaline AA batteries.
•
Do not try to heat, ignite, disassemble or throw AA batteries into
a fire.
•
Do not leave old batteries in the console, and remove batteries
from the console if you won't be using it for a long time.
Protect the environment by not disposing of this
product or batteries with household waste. Check your
local authority for recycling advice and facilities.
* PICTURE MAY VARY FROM ACTUAL MODEL.
18
Diagram 1
Diagram 2