York Fitness XC530 Owner's Manual page 9

Step 4.
• You may find that you prefer to support the front post
either between your legs or with your hand.
• (Diagram A)
Connect the upper tension cable to the
inside bracket at the end of the lower tension cable.
• (Diagram B)
Once the upper tension cable is connected
to the inside bracket, firmly pull the upper tension cable
upwards, above the connecting bracket as shown.
• (Diagram C)
Position the upper tension cable in the slot
at the top of the connecting bracket. Ensure the metal
end of the upper tension cable is engaged in the slot as
shown.
• (Diagram D)
Connect the sensor wire plug protruding
from the main frame to the middle wire plug protruding
from the end of the front post.
• Check the middle wire runs up the front post and out of
the top - later this will connect to the computer.
9