Edit Custom; Fixture Settings - ProLights CROMOSPOT500 User Manual

18

3.13 EDIT CUSTOM

• Press the MENU button, select the [Edit] menu voice and press the ENTER button to confirm the choice.
• Edit the custom programs by adjusting the value of [Step], [Pan], [Tilt], [Speed], [Color], [Gobo1], [Gobo2], [Gobo2
Rot], [Prism], [Prismt], [Iris], [Focus], [Dimmer], [Strobe], [Time] and [Use].
• Press the ENTER button to confirm.
• Enter [Use] and select [Yes] to run the steps user need.
CROMOSPOT500 will execute all the steps in the custom program and it will stop. To make the fixture to
start over add a last step whose duration is 0 second.
Example
Step1:
Step2:
Step3:
Step4:
Step5:
...
Step255:
NOTE. CROMOSPOT500 will execute all the steps in the custom program in the stand-alone operation mode.
• Go to MENU > [Intro] . Enter [Run] to select the operation mode: [Custom].

3.14 FIXTURE SETTINGS

It is possible to change the parameter value in the following way:
Invert function
• Press the MENU button, select the [Invert] menu voice and press the ENTER button to confirm the choice.
• Select the parameter to be changed between [Pan], [Tilt] and [Dimmer] and press the ENTER button to
confirm.
• Set the desired parameter value using the UP and DOWN buttons and press the ENTER button to confirm
the setting.
• Press the MENU button to go back or wait 30 seconds for automatic exit from the menu.
Used
Pan
movement
Used
Tilt
movement
Adjusting the dimmer
Dimmer
• Enter [Use] and set [Yes] to run the new setting.
CROMOSPOT500
Time=5 Use= Yes
Time=4 Use= Yes
Time=6 Use= Yes
Time=0 Use= Yes
Time=0 Use= No
... ...
Time=0 Use= No
for reversing Pan
for reversing Tilt
This step creates a loop
Unused steps
To disable
Normal
To enable
Reverse
To disable
Normal
To enable
Reverse
Normal setting
Normal
Reverse setting
Reverse