Operation In Stand-Alone Mode; Master/Slave Mode - ProLights CROMOSPOT500 User Manual

MENU
(2)

3.4 OPERATION IN STAND-ALONE MODE

If no DMX control signal is present at the jack DMX INPUT, and the unit independently runs through its show
programme.
• Press the MENU button and select, via the directional buttons, the [Intro] menu choice, then press the
ENTER button to confirm the choice.
• Press the UP and DOWN buttons to select [Run] menu voice and confirm the choice by pressing the
ENTER button.
• Select a stand-alone operation mode: [Auto1], [Auto2], [Custom], [Sound1], [Sound2], [Slave] or [Test], and press
ENTER button.
NOTE. When the fixture is on Stand-Alone mode, it will be automatic set as master fixture.
CROMOSPOT500
Blackdelay
Reset
Special
Fanwait
DMXerror
Speed
Color
Gobo1
Gobo2
Gobo2rot
Edit
Prism
Prismt
Focus
Dimmer
Strobe
Extra Password
No
Yes
Dmx
System
ON
OFF
Save
Black
Step (001-255)
Pan (000-255)
Tilt (000-255)
(000-255)
(000-255)
(000-255)
(000-255)
(000-255)
(000-255)
(000-255)
Iris (000-255)
(000-255)
(000-255)
(000-255)
Time (000-255)
No
Use
Yes
******
11