Static Configuration; Editing Custom Programs; Special Functions; Calibration Functions - ProLights ARCLED7314HD User Manual

3.13 STATIC CONFIGURATION

To set the custom balance of red, blue and green:
• Press the button MENU, then press the button UP/DOWN so many times until the display shows [STAT].
Press the button ENTER to confirm.
• Select the color red, green or blue (RED - GREN -BLUE) through the buttons UP and DOWN and then press
the button ENTER.
• Set the value (000 - 255), through the buttons UP/DOWN.
• Set the value of the [STRB] tra (0 - 20) through the buttons UP/DOWN.

3.14 EDITING CUSTOM PROGRAMS

To set the custom balance of red, blue and green:
• Press the button MENU, then press the button UP/DOWN so many times until the display shows [EDIT].
Press the button ENTER to confirm.
• Select the program PR.01 - PR.10.
• Each custom program has 30 steps that can be edited.
• Each step allows the creation of a scene using red (RED), green (GREEN), blue (BLUE), (STRB), (TIME) and (FADE).
• Set the value (000 - 255), through the buttons UP/DOWN.

3.15 SPECIAL FUNCTIONS

Press the button MENU and select through the directional buttons the [SETTINGS] mode; and press the but-
ton ENTER to confirm.
NOTE - The factory access password is UP + DOWN + UP + DOWN. Press ENTER to confirm the access.
It is possible to view to following functions:
UPLOADD
• Select [UPLd] to upload the custom programs from the current Master unit to the Slave units.
• In order to activate the upload function the password must be entered. Password is the same as the
main access password.
REST
• In order to reset custom modesto default values select [REST].
COLOR
• [COLO] is for activate/deactivate the color calibration functions.
- When [RGBW] is selected, on RGB =255, 255, 255 the color is displayed as calibrated in CAL2
(RGBW).
- When [COLOR] is set [OFF], on RGB =255, 255, 255 the RGB values are not adjusted and the output
is most powerful.
- When [UC] is selected, the RGB output adjusted to a standard preset universal color which
balances fixtures from different generations.
DIMMER
• Enter [DIM] to select dimmer mode and dimmer speed. When dimmer is set to [OFF], the RGBW and
MASTER DIMMER are linear. The Dim1/2/3/4 are speed modes of the non linear dimmer, [DIM1] is the
faster, while [DIM4] is the slowest.
NOTE - The factory default setting is [DIM4].
ARCLED7314HD
17