ProLights CROMOSPOT500 User Manual page 47

Moving head
Table of Contents

Advertisement

Available languages

Available languages

Range function
• Press the MENU button, select the [Range] menu voice and press the ENTER button to confirm the choice.
• Select the parameter to be changed between [P/start], [P/finish], [T/start] and [T/finish]; press the ENTER
button to confirm.
• Set the desired parameter value (0-255) using the UP and DOWN buttons and press the ENTER button
to confirm the setting.
• Press the MENU button to go back or wait 30 seconds for automatic exit from the menu.
Starting point for the limited Pan
P/start
P/finish
Finishing point for the limited Pan
T/start
Starting point for the limited Tilt
Finishing point for the limited Tilt
T/finish
• Enter [Use] and set [Yes] to run the new setting.
Special function
• Press the MENU button, select the [Special] menu voice and press the ENTER button to confirm the choice.
• Select the parameter to be changed between [Blackd],[Reset], [Funwait], and [DMXerror]; press the ENTER
button to confirm.
• Set the desired parameter value using the UP and DOWN buttons and press the ENTER button to confirm
the setting.
• Press the MENU button to go back or wait 30 seconds for automatic exit from the menu.
Move-in Black
Blackdelay
Reset control
Reset
Allows you to block the
Funwait
rotation of the fan when the
unit is in blackout modes
Control in case of DMX signal
DMXerror
errors
CROMOSPOT500
No
Yes
Dmx
System
On
Off
Save
Black
000-255
000-255
000-255
000-255
without delay
3 seconds delay
DMX control reset
DMX cannot control reset
Activates
Disable
Saves the latest data DMX on error DMX
signal.
Allows you to activate the mode on
error DMX Blackout
19

Advertisement

Chapters

Table of Contents
loading

Table of Contents