ProLights CROMOSPOT500 User Manual page 48

20
Display setting
• Press the MENU button and select, via the directional buttons, the [Intro] menu choice, then press the
ENTER button to confirm the choice.
• Press the UP and DOWN buttons to select [Display] menu voice and confirm the choice by pressing the
ENTER button.
• Select a display mode [60close] or [Bright].
When in the [60close] setting, the display backlight will turn off after 60 seconds.
When in the [Bright] setting, the display backlight will stay on.
Keylock function
• Press the MENU button and select, via the directional buttons, the [Intro] menu choice, then press the
ENTER button to confirm the choice.
• Press the UP and DOWN buttons to select [Keylock] menu voice and confirm the choice by pressing the
ENTER button.
• Select a display mode [On] or [Close].
When the fixture is set as pass [On] after 30 seconds or turn on the fixture next time, the fixture will need
an access password to enter the display menu control.
NOTE. The factory access password is UP + DOWN + UP + DOWN. Press ENTER to confirm the access.
Fixture information
• Press the MENU button and select, via the directional buttons, the [Intro] menu choice, then press the
ENTER button to confirm the choice.
• Press the UP and DOWN buttons to select [Info] menu voice and confirm the choice by pressing the
ENTER button. The display will show the installed software version.
CROMOSPOT500