How To Show, Hide Ais Targets - Furuno FMD-3100 Operator's Manual

14. AIS TARGET FUNCTIONS
14.4

How to Show, Hide AIS Targets

Targets that are being tracked by an AIS transponder can also be displayed on the
ECDIS display. To show or hide AIS target, select the [TT/AIS] page from the [Overlay/
NAV Tools] box. Click the indication circled in the figure below to display [DISP OFF],
[DISP FILT], [DISP ALL] or [FUNC OFF].
DISP OFF: Turns off the AIS display. (Tracking continues internally.)
FILT OFF: Shows all AIS targets within the range set.
FILT ON: Targets are shown according to the AIS DISP filter settings, on the [TT/AIS]
menu.
FUNC OFF: Deactivates the AIS function
To deactivate the AIS function, click the location circled above to show [FUNC OFF].
Then, processing of AIS targets is stopped. To turn on the AIS function, click the area
to show [FILT OFF], [FILT ON] or [OFF].
Note: The AIS, TT and radar displays can be hidden, when the radar overlay is active.
Click the [CLEAR RADAR] button on the Status bar to hide those displays.
14-6
CPA/TCPA settings and LOST TGT
(target) filter settings are not available
from this system.